Go to Sitemark
All Collections
Flying & Acquiring Data
Flight Preparation
What drone hardware is compatible with Sitemark?

What drone hardware is compatible with Sitemark?

This article contains all of the equipment that is currently compatible with the Sitemark platform. Latest update 29.10.2021 V4
Marketa Raym avatar
Written by Marketa Raym
Updated over a week ago

LATEST NEWS:

These are the sensors that we are currently compatible with and matching the product requirements:

SENSORS

PRODUCT

VISUAL SENSOR (RGB)

THERMAL SENSOR (TRM)

MULTISPECTRAL SENSOR (MSP)

SOLAR PRO

  • DJI H20T

  • DJI Zenmuse XT2(13mm/19mm/25mm)

  • DJI Zenmuse XT (13/19mm)

  • Flir Duo Pro (13/19mm)

  • FLIR Vue Pro R (13mm)

  • Flir Tau-2 (19mm only)

  • M2EA 🎉

* Dual Camera is highly recommended

N/A

SOLAR ESSENTIAL

  • DJI H20T

  • DJI Zenmuse XT2(13mm/19mm/25mm)

  • DJI Zenmuse XT (13/19mm)

  • Flir Duo Pro (13/19mm)

  • FLIR Vue Pro R (13mm)

  • Flir Tau-2 (19mm only)

  • M2EA 🎉

* Dual Camera is highly recommended

N/A

SOLAR AS-BUILT

N/A

N/A

SURVEY ESSENTIAL

  • DJI Phantom 4Pro/V2/

    Advanced/RTK

  • DJI Zenmuse X4s

  • DJI Zenmuse P1

  • S.O.D.A. (senseFly eBee X RTK)

  • Sony RX1R II 42MP (Wingtra RTK )

  • H20T - RGB Zoom lens

  • H20- RGB Zoom lens

  • Mavic 2 Pro (only when GCP's are not used)

N/A

N/A

SOLAR CONSTRUCTION MONITORING

  • DJI Phantom 4Pro/V2/

    Advanced/RTK

  • DJI Zenmuse X4s

  • S.O.D.A. (senseFly eBee X RTK)

  • Sony RX1R II 42MP (Wingtra RTK )

  • DJI Zenmuse P1

  • H20T - RGB Zoom lens

  • H20- RGB Zoom lens

  • Mavic 2 Pro (only when GCP's are not used)

N/A

N/A

POINT CLOUD / Visual RGB Orthomosaic

N/A

(Pre-processed data)

N/A

N/A

PLANT PHENOTYPING

  • DJI Phantom 4Pro/V2/Advanced/RTK

  • DJI Zenmuse X4s

  • DJI Zenmuse P1

  • X5s

  • X7

  • PhaseOne

  • DJI H20T

  • DJI Zenmuse XT2(13mm/19mm/25mm)

  • DJI Zenmuse XT (13/19mm)

  • Flir Duo Pro (13/19mm)

  • FLIR Vue Pro R (13mm)

  • Flir Tau-2 (19mm only)

* Dual Camera is highly recommended

  • Micasense

  • Rededge

    M/MX/Altum

Thermal Sensor requirements

All thermal sensors mentioned about must meet the following standards/requirements (unless stated otherwise) in order to be compatible with the platform:

Lens size: 13mm /19mm /25mm

Sensor resolution: 640x512 px

Radiometric: Yes

Firmware Update: always check the latest version

DRONES

powered by DJI

There is a range of drones that are compatible. These are the latest selection based on our experience. Feel free to reach out with your flying combo and we can always recommend based on the request.

DJI Phantom 4

DJI Phantom 4 RTK

DJI Inspire 1

DJI Inspire 2

DJI Matrice 200

DJI Matrice 210

DJI Matrice 210 RTK

DJI Matrice 300

DJI Matrice 600

Falcon 8

Sensefly eBee

Sensefly eBee X

Wingtra One

Recommendation

Since the dual thermal sensor Zenmuse XT2 is no longer in production therefore we can recommend the DJI H20T sensor for the moment, as the preferred and most powerful combo together with the Matrice 300 for solar site inspections.

FAQs

What if my sensor isn't on the list?

Unfortunately it means that at this moment we are not currently compatible with this sensor. However depending on the business case we can look into the sensor to see if it matches our requirements.

Successful mission!

Did this answer your question?