1. These are the drones and sensors that we are currently compatible with
Drones
DJI Phantom 4
DJI Phantom 4 RTK
DJI Mavic 2 Pro
DJI Inspire 1
DJI Inspire 2
DJI Matrice 200
DJI Matrice 210
DJI Matrice 210 RTK
DJI Matrice 300
DJI Matrice 600
Falcon 8
Sensefly eBee
Sensefly eBee X
Wingtra One
Accessories
RGB Cameras
DJI Phantom 4 Pro/V2/Advanced/RTK
DJI Zenmuse X4S
DJI Zenmuse XT2
DJI Mavic 2 Pro
Flir Duo Pro
Lumix DMC-TZ71
Wingtra One Sony RX1R II 42MP
Thermal Cameras
DJI Zenmuse XT (13 or 19mm)
DJI Zenmuse XT2 (13 or 19mm)
Flir Duo Pro (13 or 19mm)
Flir Tau-2 (19mm only)
Multispectral
Micasense Rededge M
Micasense Rededge MX
Micasense Rededge Altum
2. These are the drones and sensors that are currently under review:
Drones
Mavic 2 Enterprise Advanced [under review + to be tested in Q1 2021]
Accessories
RGB Cameras
Thermal Cameras
DJI Zenmuse H20T [under review]
Mavic 2 Enterprise Advanced [under review + to be tested in Q1 2021]
Multispectral
3. Sensor requirements
Thermal
All thermal sensors mentioned about must meet the following standards/requirements (unless stated otherwise) in order to be compatible with the platform:
Lens size: 13mm or 19mm
Sensor resolution: 640x512
Radiometric: Yes
For example, the DJI Zenmuse XT2 must have a lens size or either 13mm or 19mm, the sensor resolution should be 640x512 (not 320x240) and must be the radiometric version.
4. FAQs
What if my sensor isn't on the list?
Unfortunately it means that at this moment we are not currently compatible with this sensor. However depending on the business case we can look into the sensor to see if it matches our requirements.